For general household DIY, a 4- to 5-inch vise is large enough to handle most tasks. (This measurement is the length of the jaws from end to end and is maximum amount of contact your vise has with the workpiece.).
Simply so, how do you measure your vise size?
The throat depth is how deep the jaws of a vice are and is measured by the vertical distance from the top edge of the jaws down to the top of the screw/slide. This indicates the maximum height of a workpiece that is capable of fitting into the throat of a vice.
Also, how do you use a vise? Ensure that the workbench is firmly secured to its base.
- Check the vise for cracks or other damage before clamping a workpiece in it.
- Use a vise large enough to hold the work without strain.
- Place the workpiece in the vise so that the full clamping surface of the jaw supports the workpiece.
Similarly, it is asked, how do I choose a bench vise?
Choosing a Bench Vise
- Step 1: Jaw Width. The jaw width is key in selecting.
- Step 2: Jaw Opening. If you wanna grip big steel pipes, you need a big opening.
- Step 3: Mounting. Most vises are mounted using 3 or 4 bolts.
- Step 4: Pipe, Bench or Combo. A serrated bench jaw can easily hold pipe and rectangular objects.
- Step 5: Mounting.
Where can I buy a good vise?
View the Best Bench Vise for the Money, Below.
- Wilton 11104 Wilton Bench Vise 4-Inch.
- Yost Vises Multi-Jaw Rotating Bench with Swivel Base.
- Yost LV-4 Home Bench Vise.
- Olympia Tool 38-604 4-Inch Bench Vise.
- Yost Vises 445 4.5″ Utility Bench Vise.
- TEKTON 4-Inch Swivel Bench Vise.
- PanaVise 381 Vacuum Base PanaVise.
Related Question Answers
What is vise throat depth?
Throat depth is the vertical distance from the top edge of the jaw (flush with the bench top) down to the top of the main screw and guide rods. For these vises, 3 to 4 inches is the optimal throat depth range.What are the different types of vices?
Types of Vise - Woodworking Vice. Woodworking vice is one of the most popular tools among the different types of vises we have today.
- Metalworking Vice. Metalworking vice refers to a type of vice associated with two parallel iron jaws with a wide opening base.
- Pipe Vice.
- Vacuum Vise.
- Clamp-On Vise.
- Combined Vise.
- Handheld Vise.
- Angle Vise.
What does a vise do?
A vise (American English) or vice (Other English speaking countries) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever.What is a mechanics vise?
It would appear that 'mechanics' vise' is a quite modern term, used by some sellers of vises to denote a vise of the 'machinists' pattern, generally, but more lightly and cheaply built.Are Yost vises any good?
Yost is the superior vise and you should buy this one from me. Ok, I'll echo what others have saidthey're both excellent quality vises. The Wilton enclosed slide is nice because it keeps the swarf out of the works. The square slide units tend to open a little wider and have more jaw depth.What is the specification of bench vice?
Following are the specifications, in which these vices are available: Size: 4", 5", 6", 8", 10". Precision cast body with coating finish. Base: Swivel base with anvil, swivel base without anvil, fixed base with anvil, fixed base without anvil.How do I know what my Wilton vise is?
Old Wilton Vise Identification. If you aren't familiar with it yet, the slide key you see on Wilton vises have dates stamped on it. These dates indicate when the vise was ready to be released or for sale. You can find the slide key in the body of the vise, which keeps its front jaw from rotating.How does a bench vise work?
A vice has two parallel jaws which work together to firmly clamp an object and hold it in place. A threaded screw, which is connected to the jaws, runs through the body of the vice, and its movement is controlled by a handle, which is located on the outer end of a vice.Where do you mount a vise?
Vise Location And Selection Right-handers should mount a face vise at the far left of the bench's front edge and an end vise on the end of the bench at the foremost right-hand corner. Southpaws will want to do the opposite.What is a front vise?
A front vise is the most generally useful vise on a typical workbench. It can be used for clamping parts on edge within the jaws, for clamping large parts in combination with a deadman, and for clamping parts on top of the workbench when used in combination with bench dogs.How does a front vise work?
A cast iron front vise has two jaws made of you guessed it cast iron and a steel screw to move them closer together and further apart. Most also have two steel rods to keep the jaws aligned and help to prevent flexing inward of either side of the outer jaw when only one side of the vise is used.What is AC clamp?
A C-clamp is a type of clamp device typically used to hold a wood or metal workpiece, and often used in, but are not limited to, carpentry and welding.What are vise jaws made of?
Metal vise jaws are usually made of aluminum or soft steel. They are sometimes heat treated, anodized, or coated with black oxide. Plastic vise jaws are usually made of polyurethane (PU), a broad category of polymers that resists abrasion and solvents to varying degrees.Where are Wilton vises made?
The new Wilton Tradesman vises are made in Taiwan, and will be replacing current SKUs. The new Mechanics Pro vises, which have lower price points, feature an enclosed spindle, precision machined slide, a needle roller thrust bearing design, and 360° swivel base.Are Yost vises Made in USA?
Yost Vises- Made in the USA There are no further specifications. There is no further information. There are no listed accessories. 
