How do you replace a drain pump on a Kenmore Elite washer?

Remove the drain pump mounting screws and pull the drain pump out of the pump body. Insert the new drain pump into the pump body and reinstall the mounting screws. Reinstall the pump body in the washer base and secure it with the mounting bolts. Reconnect the wires to the new drain pump and the recirculation pump.

.

Correspondingly, how do I know if my washing machine drain pump is bad?

If the motor and pump is running but no water is draining out then most likely the 3363394 pump is bad. One thing you can try first is to lower the drain hose over a shallow pan and see if the water in the tub will drain by gravity. If not then there may be a sock or other obstruction blocking the pump.

Likewise, how do you drain a Kenmore washer? How to Manually Drain Water From a Kenmore Washing Machine

1. Pull the washer away from the wall until you have enough room to access the back panel of the machine.
2. Place the bucket behind the washer next to the drain hose.
3. Unhook the drain hose from the drainpipe.

Beside above, how do you test a washing machine pump?

How to Use an Ohmmeter to Test a Washing Machine Pump

1. Check the washing machine power cord to ensure it is unplugged from the electrical outlet.
2. Turn on the ohmmeter and touch the probes together. Adjust the scale dial to zero.
3. Find the two wires connecting to the side of the pump.
4. Touch a probe to each of the terminals on the pump.

Why is my washing machine not draining?

If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. If the washer won't drain the lid switch assembly might be defective. This is a very common problem.

Related Question Answers

How do I fix my washing machine pump?

How to Repair a Washing Machine

1. Step 1: Check the drain hoses to make sure they're draining properly.
2. Step 2: To access the pump, first bail and sponge out any water in the machine's tub.
3. Step 3: Locate the pump.
4. Step 4: To remove the pump, loosen the bolt that holds the drive belt taut and move the washer motor on the bracket to loosen the belt.

Where is drain pump on Kenmore front load washer?

The drain pump is located in the lower front corner of most Kenmore front-loading machines, and the most difficult part of the job may be getting to it. If the machine doesn't have an access panel, as some do, you'll have to take the entire front panel off.

How much is a water pump for a Kenmore washer?

He removed the sock and cleaned out the pump but it stil wasn't working so we sent ahead and purchased a new pump. This is the 2nd time we have change it out on our older Kenmore elite washer. Time for new washer & dryer.

Top Selected Products and Reviews.

List Price:	$49.95
Price:	$29.99
You Save:	$19.96 (40%)

Where is the drain pump located on a washing machine?

The purpose of the drain pump is to pump the water from the wash, through the drain hose, to then be drained away. The drain pump is located at the bottom of your washing machine, but can be easily accessed in order to replace it if need be.

Where is the drain pump on a front load washer?

The pump on an LG machine is located in the front of the washer on the bottom left near the floor. The LG front-load washer has an accessible drain filter to help keep lint and objects out of the pump.

How do you drain a washing machine?

Drain a Top-Loading Washing Machine

1. STEP 1: Turn off the power.
2. STEP 2: Locate the drain hose and water supply hoses.
3. STEP 3: Drain the washing machine of water.
4. STEP 4: Remove a drain hose clog.
5. STEP 5: Remove a drain pump clog.
6. STEP 1: Turn off the power.
7. STEP 2: Locate the drain pump filter and/or drain tube.

How much does it cost to replace a washing machine drain pump?

Below are average costs for common washing machine replacement parts, though they vary widely by brand: Water or drain pump: $35-$200. Drain hose: $3-$30. Motor: $150-$500.

How long does a washing machine pump last?

The average life expectancy of a new washing machine is 11 years. Consumer Reports recommends replacing any appliance that's more than eight years old, unless it's a high-end model and has a particular appeal to you. Others suggest replacing any top-loading washer manufactured in 1999 or earlier.

How does a drain pump work on a washing machine?

The washer pump forces water from the bottom of the machine into the drain hose. The drain hose loops to the top of the machine, and then down to the drain, enabling the tub to fill. When the water reaches the bend in the hose, it goes out of the drain.

How do I know if my whirlpool drain pump is bad?

Remove the drain hose by unscrewing the clamps holding it to the pump outlet. Look for blockages inside the hose. If you don't see any, the pump may be blocked or faulty. To check it, you have to disconnect the belt connecting it to the drive motor.

Does a Kenmore washer have a filter?

A Kenmore front-load washer is a high-efficiency machine. But like any washer design, some simple maintenance is necessary now and then. If your washer is having trouble draining, the drain filter may need some attention.

Why does my Kenmore Elite washer smell?

Though meant to clean the clothes you put in, the overall smell emanating from your top loading Kenmore Elite is anything but clean. Often the result of mold or mildew, this smell is an indication that your washing machine is due for a good cleaning.