How do you make a pocket rod curtain?

Make DIY Rod Pocket Curtains and Never Buy Curtains Again!

Materials You'll Need to Make Rod Pocket Curtains: Drapery fabric.
Prepare Your Fabric. Measure your windows and cut your fabric according to its size.
Sew the Sides of Your Curtain Panels.
Prepare the Top Hem.
Sew the Bottom Hem.

Correspondingly, how wide is a curtain rod pocket?

A 1 ½” rod pocket should be used on a standard 1” curtain rod or with a decorative rod 13/16” diameter or smaller. A 3” rod pocket should be used on a standard 2 ½” continental or dauphine rod or on a decorative rod 1 3/8” – 1 ½ ” diameter.

Also Know, how do you measure for rod pocket curtains? Determine Length, Sew Side Seams Measure the circumference of your curtain rod. Add 1/2 inch to this measurement. For example, a standard curtain rod will measure 2 inches around so your rod pocket opening will need to be 2 1/2 inches; add this to the length of your curtains.

Similarly, what is a rod pocket curtain?

Rod pocket curtains, also called pole top or casement curtains, are a classic, and classy, way to hang drapery. A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines.

What is the size of a standard curtain rod?

Traditional. In traditional style, the curtain rod is about 6 inches above the top of the window, and it extends beyond the window 3 inches on each side. The curtain will hang 3 inches below the bottom of the window sill. This look offers a few advantages.

How do you connect two curtain panels together?

Instructions for Sewing Curtain Panels Together

Unstitch the vertical side seams on two curtain panels that you plan to sew together.
Unpick the stitching in the top sleeve and on the bottom hem.
Iron the side seam marks flat along the entire length of both panels.
Place panels right-sides together and pin.
Stitch a 5/8-inch seam end to end, joining both panels.

How wide are gathered curtains?

How wide should a gathered valance be for a 33" window? If you want a gather with a regular amount of fabric, use 1.5 times the width. For a more full-gathered look, double the amount of fabric to 66 inches.

What is a header on a curtain?

By Harvey Furnishings. A curtain's heading is the top piece of the curtain that attaches to the curtain track or rod. The heading style you choose can dramatically change the overall look of your finished curtains and will influence the type of rod or track you can use.

Are drapes out of style?

Just like a short Chanel jacket, classic pleated drapes never go out of style, can be dressed up or down, and never lose their functionality. Overdressed, overlayered curtains that match the overused wall borders are, indeed, outdated.

Can you use regular curtains on a traverse rod?

You will be able to use your curtains with a regular rod or a traverse rod.

Can you use curtain hooks on rod pocket curtains?

The rod pocket is internal so the curtain panel is essentially a simple panel rectangle. Determine the header style you want for your drapery look and in a few minutes, you can transform your curtain panels into drapes that use drapery hooks.

How do you hang rod pocket curtains on a traverse rod?

How to Hang Non–Pinch-Pleated Drapes on a Traverse Rod

Turn the drapery panel inside out and check for the presence of heading tape.
Measure the space from the wall to the front of the carrier on the traverse rod.
Indicate pin placement marks along the top of the back of the drapes by inserting a straight pin, perpendicular to the top edge, equidistant across the panel.

Do eyelet curtains look cheap?

One the reasons eyelets are cheaper (and look cheaper) is because they don't use as much fabric, so you lose the cosy fullness of pencil-pleat curtains.

Can you use back tab curtains with a traverse rod?

If you want to use a traverse rod, that opens and closes with the pull of a cord, you need to alter your tab-back panels to accept a drapery pin. Just by making a small single-finger pleat, the curtains can accept a pin and hold the folds in place as the curtains are opened and closed on a traverse rod.

How do you make a loop curtain?

Instructions

Determine Tab Length. Fold a strip of fabric over the curtain rod and pin the length you want your tabs to be.
Cut 'Em Out. To determine how many tabs you'll need, put one at both outside edges of the curtain.
Finish the Panel Edges.
Attach the Tabs.
Attach the Facing.
Press the Facing.

What are curtains with hooks called?

Pencil Pleat, also known as Tape Top or 3” Tape curtains, is the standard heading for curtains and valances. Pencil pleat curtain heading usually consists of three rows of string threaded through it for three hook positions to suit all types of track and pole.

What kind of curtains use hooks?

Types of Curtain Hooks

Round pin-on hooks have a rounded top that slides on a cafe or sash rod, allowing pinch-pleated curtains to be used without the standard traverse or rod and rings hardware.
S-hooks are commonly used to hang shower curtains; the top part of the hook goes over the rod and the bottom part fits the grommets in the curtain.

How thick should a curtain rod be?

Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.

Should curtains touch the floor?

The fabric should just touch the floor or hover half an inch above. This is also a great approach for café curtains (short panels that cover only the lower portion of a window and hit the sill), which work well in spots like the kitchen and bathroom, where long drapes aren't practical.

Do eyelet curtains need to be double width?

You need to allow for both flat panels to be a minimum of one and a half times the curtain pole width. I personally think they look much better at double the pole width. Give or take a couple of inches. This allows the curtains to have enough fabric to allow the pleats to look right when hanging over your window.

How wide should curtains be for 60 inch window?

Example: For a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.

How wide should curtains be for a 72 inch window?

Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72" or 2 panels for that window. In this case 2 panels will give about 100" to 120" of width which will look nice and full. Always round up to the next full number.

How wide should curtains be for 40 inch window?

Example: If your window measures 40" wide ( window width x 1.5 = minimum width needed / x 3 = maximum width needed), you should need a curtain ( or curtain set/pair) with a width between 60" - 120 wide to properly cover your windows width, and achieve it's proper appearance.

How many inches should a curtain hem be?

Standard curtains have a 3 to 4 inch (7.62 10.16 centimeters) wide hem. You'll need to cut your curtains 6 to 8 inches (15.24 to 20.32 centimeters) longer than you want them to be. Shorter curtains might look better with a 2 inch (5.08 centimeter) wide hem.